NComputing VSPACE L130 User Manual page 15


At the "Customer Data" screen, if the data fields are not already populated, enter the registered user's
relevant information. Each field in this window must be filled in. Once all data has been entered, click
on the "Next" button.

Select "Register online, using your internet connection" and click "Next."
Note: If you use a Proxy Server for internet connectivity, enter the Proxy connection data here.

The registration wizard will then show you a list of all unregistered L-series access devices that are
currently connected to this vSpace host. You cannot select which devices will be registered – all
devices shown in this list will be registered.

Before the registration wizard communicates with the registration server, you will get the following
"Summary" screen showing all user information that will be registered with the vSpace software. Also,
any connected but unregistered L-series access devices will be listed for registration. If the data is
correct, click on the "Register" button to initiate the registration or click "Back" if you wish to change any
of the information.

When your registration is complete, you see the "Registration results" screen. Be sure to click the
check box for the "Register future L-series devices in the background" option, if you want vSpace to
automatically register any unregistered L-series access devices that connect to this system in the
future. Use of this "background registration" feature requires standard internet connectivity.
L300/L230/L130 User Manual
15