NComputing VSPACE L130 User Manual page 24

L300/L230/L130 User Manual
The "Update" Tab
Your NComputing L-Series access device may at times require a firmware update. To do this, select the
"Update" tab and click on the "Update" button. When the access device asks you for a password, enter
"updateme" (without the quotes). Your access device will walk you through the process of updating the
firmware.
It is crucially important that you follow the instructions. If you turn off the access device during the firmware
update process, it may become non-functional.
After the firmware update process is complete, reset the access device by turning it off and on.
Certain changes in the vSpace software require a firmware update in each access device connecting to it.
NComputing notifies customers via product Release Notes when a firmware update is required by a given
vSpace software update.
24