Logbook - Navigon 2100 User Manual

Recalculate Route
Tap on Recalculate Route and select how new traffic messages
concerning your route are to be used.
Automatically: An alternative route will be calculated automatically.
►
The system will inform you on the recalculation.
On Request: A window opens with information about the location
►
and type of traffic obstruction. You can then decide whether an
alternative route is to be calculated or not.
6.7.5

Logbook

You can use the NAVIGON 2100 | 2110 max to record a logbook. The
logbook is recorded in the "Logbook.xls" file. You can open the file with
Microsoft Excel. Each recorded trip is added at the bottom of the table
as a new entry.
The first time a trip is recorded, the "Logbook.xls" file will be created in
the "Navigon\Logbook" folder on the memory card in the navigation
device. If you delete or move this file, a new file will be created when
you next record a trip.
Note: Trips are recorded simultaneously in another file which is
compatible with the WISO Sparbuch program. This file is called
"MN7DriversLog.bin". It can also be found in the "Navigon\Logbook"
folder on the memory card in the navigation device.
Recording trips
You can have all trips recorded automatically.
1. In the N
2. Set Logbook to Yes.
3. Tap on OK.
Every trip from now on will be recorded until you reset Logbook to No. It
is possible, however, to exclude individual trips from the recording.
Before a trip
If your trips are recorded in the logbook, a window for entering the trip's
key data is opened before navigation starts. You can also decide,
however, not to record the trip in question.
If you don't want to record the trip in question, tap on
►
(Cancel).
- OR –
1. Enter a name for this entry, e.g. "Trip to customerX", in the Logbook
Entry box.
2. Enter the mileage.
Navigation
window, tap on Options > Settings > Logbook.
AVIGATION
User's Manual NAVIGON 2100 | 2110 max
- 47 -