Reality View Pro - Navigon 2100 User Manual

Day/Night: Changes between "Day" and "Night" display modes. The icon
indicates the current mode.
Interim Destination: Opens the menu for entering an interim destination.
The navigation system will first guide you to this interim destination.
Afterwards you can continue your original navigation.
Skip Route Point: Tap on this button to omit the next route point. This button is
active only when at least 2 route points still lie ahead of you. (See
"Multi-leg routes" on page 32)
Block: Tap on this button in order to block a section of the route that lies in
front of you, i.e. to recalculate the route in order to avoid this section,
e.g. if you have heard on the radio of a traffic jam affecting this section.
Tap on this button again to remove the block.
POI on Your Route: Tap on this button to display POI on your route. This way
you can quickly find out, for example, how far it is to the nearest
services. A destination shown here can be added as an interim
destination by tapping the
of its entry in the list.
6.6.4

Reality View PRO

The map switches to Reality View mode when you approach one of the
following points while driving on the motorway:
a motorway junction
►
a three-leg motorway junction
►
the exit you must take to leave the motorway
►
The Reality View mode shows with greater clarity the signposting and
lanes you must follow.
This display does not change until you have passed the spot indicated.
The map will then change back to Navigation mode.
Navigation
User's Manual NAVIGON 2100 | 2110 max
(Interim Destination) button to the right
- 41 -