Operating In Destination Search Mode - Navigon 2100 User Manual

Entire Route: Zooms the map so that the entire route is visible.
Current Position: Selects the section of map displayed so that the
current location is at the centre.

Operating in Destination search mode

1. Tap on the point to which you want to navigate.
The destination that you have selected appears under the cross
hairs.
The geographical coordinates of the destination and the
corresponding address are shown in the bottom third of the screen.
2. Tap on
Buttons with various functions will be displayed.
Take Me There: Starts navigation to the selected point. If you are currently
navigating, this route navigation will be cancelled.
Interim Destination: Sets the selected point as interim destination. The
navigation system will first guide you to this interim destination.
Afterwards you can continue your original navigation.
This function is only active during navigation.
Set as Destination: Adds the selected point to the route planning as the last
point. Navigation will then continue to this point after you have reached
the original destination or the other route points. The function is
available only during navigation.
Save: Opens the S
which the selected point will be saved in the F
For more details refer to chapter "Saving destinations" on page 31.
Search Nearby: Opens the POI N
destinations near the selected point. (Refer to "POI nearby" page 24)
Tap on
►
search mode. You will be returned to the window from which you
started this mode.
Tap on
►
window. If you are currently navigating, you will be prompted to
confirm your decision to quit navigation.
Navigation
(OK).
D
AVE ESTINATION AS
EARBY
(Destination search) in order to quit Destination
(Back) in order to return to the N
User's Manual NAVIGON 2100 | 2110 max
... window. You can enter a name under
AVOURITES
window. Here you can search for
list.
AVIGATION
- 43 -