Navigating Home; Selecting Destinations On The Map - Navigon 2100 User Manual

3. Tap on Start Navigation.
The map opens in Preview mode. The destination is indicated on
the map.
For detailed information on how to start navigation, please refer to
chapter "Starting navigation" on page 30. Please read on there.
6.2.8

Navigating home

In NAVIGON 2100 | 2110 max you can save an address as your home
address. You can navigate to your home address at anytime by
activating a single button.
Further information about entering your home address can be found in
chapter "Defining a destination as home address" on page 31.
In the N
►
If you have not yet entered your home address, a dialog box will
notify you of this.
Navigation starts. The route profile used for the previous navigation
will be applied.
6.2.9

Selecting destinations on the map

You may select a destination directly on the map. This is a quick way to
select towns, streets and POI.
1. In the N
2. Tap on
The map opens in Destination search mode.
3. Tap on the point to which you want to navigate.
Note: Please refer to chapter "Map in Destination search mode" on
page 42 for detailed information on how to change the map view so that
your destination is easily seen.
The destination that you have selected appears under the cross
hairs.
The geographical coordinates of the destination and the
corresponding address are shown in the bottom third of the screen.
4. Tap on
The D
of the selected destination is displayed in the upper left-hand
corner.
5. Tap on Take Me There.
Navigation
window, tap on Take Me Home.
AVIGATION
window, tap on Show Map.
AVIGATION
(Destination search)
(OK).
M
ESTINATION ON AP
User's Manual NAVIGON 2100 | 2110 max
window opens. The detailed address data
- 29 -