Sony BDP-CX7000ES Service Manual page 90

BDP-CX7000ES
QQ
3 7 63 1515 0
Pin No. Pin Name
C1 GND
PCIAD27, PCIAD22,
C2 to C4
PCIAD19
C5 PCIFRAMEB
C6 PCISERRB
PCIAD14, PCIAD7,
C7 to C9
PCIAD1
C10 VOCLK
C11 VODY2
C12 VODC5
C13 AOHMCK
C14 SAGNDDIG
C15 SAVDDIG
C16 IPODC7
C17 to
SAVDDTIO
C20
C21 to
SAVDDIG
C23
C24 GPIO28
C25 VDD3
C26 GPIO13
C27 GND
C28 GPIO0
C29 GPIO5
C30 VDD3
C31 GND
C32 AO0BCK
C33 AO0BD0
TE
L 13942296513
D1 CLK27IN
D2 GND
D3, D4 PCIAD25, PCIAD20
D5 GND
D6 PCIPERRB
D7 GND
D8, D9 PCIAD8, PCIAD2
D10 GND
D11 VOVSB
D12 VODY7
D13 VODC1
D14 AOHTX
D15, D16 IPODC4, IPODC6
D17 AOHBD2
D18, D19 SAVDDTIO
D20 SAVDDIG
D21 GPIO21
D22, D23 GPIO33, GPIO29
D24 GPIO22
D25 GND
D26 to
GPIO8, GPIO6, GPIO3
D28
D29 VDD3
D30 GND
D31 AO0BD3
D32 AO0LRCK
www
D33 AO0MCK
E1 GND
E2 PCIGNT0
.
E3, E4 PCIAD29, PCIAD24
E5 PCICBEB2
E6 PCISTOPB
90
http://www.xiaoyu163.com
I/O
- Ground terminal
I/O Two-way address and data bus with the USB interface
I/O Frame signal input/output with the USB interface
I/O System Error signal input/output with the USB interface
I/O Two-way address and data bus with the USB interface
O Video clock signal output to the digital video format converter
O Digital video (Y) signal output to the digital video format converter
O Digital video (Cb/Cr) signal output to the digital video format converter
O Master clock signal output to the HDMI transmitter
- Ground terminal (digital system)
- Power supply terminal (+1.05V) (digital system)
I/O Not used
- Power supply terminal (+1.8V)
- Power supply terminal (+1.05V) (digital system)
I/O Not used
- Power supply terminal (+3.3V)
O Write protect signal output to the NAND fl ash ROM
- Ground terminal
O Chip select signal output to the HDMI interface
I/O Not used
- Power supply terminal (+3.3V)
- Ground terminal
O Bit clock signal output to the D/A converter
O Audio signal output to the D/A converter
I Not used
- Ground terminal
I/O Two-way address and data bus with the USB interface
- Ground terminal
I/O Parity Error signal input/output with the USB interface
- Ground terminal
I/O Two-way address and data bus with the USB interface
- Ground terminal
O Vertical sync signal output to the digital video format converter
O Digital video (Y) signal output to the digital video format converter
O Digital video (Cb/Cr) signal output terminal
O S/PDIF signal output to the HDMI transmitter
I/O Not used
O Audio signal output to the HDMI transmitter
- Power supply terminal (+1.8V)
- Power supply terminal (+1.05V) (digital system)
O SDC output control signal output to the video amplifi er
I/O Not used
I Data input terminal (for JTAG)
- Ground terminal
I/O Not used
- Power supply terminal (+3.3V)
- Ground terminal
O Audio signal output to the D/A converter
O L/R sampling clock signal output to the D/A converter
O Master clock signal output to the D/A converter
x ao u163
- Ground terminal
y
O Grant signal output to the USB interface
i
I/O Two-way address and data bus with the USB interface
I/O Command and byte enable signal input/output with the USB interface
I/O Stop signal input/output with the USB interface
http://www.xiaoyu163.com
2 9
8
Description
Q Q
3 6 7 1 3 1 5
Not used
Not used
co
.
9 4 2 8
0 5 8 2 9 9 4 2 8
m
9 9
9 9