Radio Operation; Select A Waveband; Select A Station; Fm Stereo Operation (Remote Control Only) - VDO CD 1327 User Manual

4. Turn the volume knob either to the left or
right to set the MINUTES.
5. Press the DISP button to store the current
setting.
The time has been set now.

RADIO OPERATION

1. Press the button to switch the set on.
If the set is not in RADIO mode:
2. Press the SEL MENU knob to select RADIO.

Select a waveband

Your radio is designed for reception of the FM
and AM wavebands.
FM 1
FM 2
FM 3
AM 1
AM 2
Press the BAND/ID3 button to select the desired
radio band.

Select a station

Seek tuning
Press button (frequency down) or
quency up) to seek for a station. The tuner will
scan down or up to the next strong station.
Manual Tuning
Long press either one of the buttons
to select manual tuning.
Press button (frequency down) or
quency up) until the desired radio station is se-
lected. If there is no further action for 10 sec.,
the radio will switch back to auto tuning mode.
Auto Store
Long press the SCH/ A /PS button, the radio will
search for the six strongest stations and store
them automatically under the preset memory
buttons 1 through 6.
Scan (Remote Control only)
This function allows you to scan the stations or
the presets of the current band.
Short Press the SCAN button and the radio will
start scanning.
When it receives a radio signal, the screen will
flash 10 times and show the reception frequency.
The radio will continue scanning using this pat-
tern.
When the desired station is reached, press the
SCAN button again to stop scanning.
16
Preset Scan
Short Press the SCH/ A /PS button, the radio
pauses for 5 sec. at each preset station. When
the desired station is reached, press the button
again to select this station.
Displaying time or frequency
Note: The set must be in radio mode.
1. Press the DISP button to toggle between the
actual time and the frequency of the section
selected.
FM Stereo Operation (Remote
Control only)
If the stereo signal becomes to weak (bad recep-
tion of the radio station):
1. Press the ST/LOC button on the remote
control until MONO appears in the display of
the radio.
2. Press this button again and STEREO ap-
pears in the radio display.

Memorising Radio Stations

1. Press the Band Button to select the desired
band, FM1, FM2, FM3, AM1 or AM2.
(fre-
2. Tune in the desired radio station.
3. Long press any of the 6 Preset buttons to
store the radio station. The number will be
displayed next to the radio frequency. For
each band you can store up to six radio
stations.
or

RADIO DATA SYSTEM (RDS)

(fre-
This feature is only available with the FM band!
Many FM stations broadcast RDS information.
All RDS related features e.g. TA, NEWS etc...
will be deactivated when option 'RDS' is set to
'OFF'.
This set uses the RDS information to offer you
many advantages including:

Display of Station Name (PS)

The radio displays the name of the station in-
stead of its frequency.

Automatic frequency (AF)

The set remains tuned to the current station by
continually searching for the best possible alter-
native frequency for reception.
Note: The AF function is preset. You can switch
off AF if not required. Press the AF/REG button
and select OFF.