Because of the extreme heat this fireplace emits, the mantel clearances are critical.
Combustible mantel clearances from top of unit are shown in the diagram below.
Note: A non-combustible mantel may be installed at a lower height if the framing is made of metal studs covered with a non-combustible
board.
Note: Mantel starts at 1" deep and end at 12" deep.
Note: Ensure the paint that is used on the mantel and the
facing is "heat resistant" or the paint may discolour.
CLEARANCES
Min. 6"
(152mm)
COMBUSTIBLE MANTEL CLEARANCES
P36-10 Zero Clearance Direct Vent Gas Fireplace |
installation
|
11
11