National Instruments DIO 6533 User Manual page 97

Mode
AT-DIO-32HS
32-bit
16-bit
8-bit
DAQCard-6533
32-bit
16-bit
8-bit
1. Pattern generation rates depend on your computer, software, and other bus activity. The rates shown were
measured for 100 kS transfers on sample Intel Pentium-based computers, using NI-DAQ software, with no other
DAQ operations in progress. The PCI-DIO-32HS Triton I rates were measured on a 100 MHz Pentium computer with
the Triton I (430FX) chip set. The PCI-DIO-32HS Triton II rates were measured on a 166 MHz Pentium computer
with the Triton II HX (430HX) chip set. The PCI-DIO-32HS Natoma rates were measured on a 180 MHz Pentium
Pro system with the Natoma (440FX) chip set. The PXI-6533 rates were measured using a 133MHz Pentium
CompactPCI controller with the Triton I chip set. The AT-DIO-32HS rates were measured using the dual-DMA
transfer method on a 100 MHz Pentium computer with the Triton I (430FX) chip set. The DAQCard-6533 Triton I
rates were measured using a 75 MHz Pentium computer with the Triton I (430FX) chip set. The DAQCard-6533
Triton II rates were measured using a 133 MHz Pentium computer with the Natoma (430HX) chip set. The
DAQCard-6533 266 MHz Pentium II rates were measured using a 266 MHz Pentium II computer with the Natoma
(440FX) chip set.
© National Instruments Corporation
Triton I Chip Set
Rates in kS/s (kbytes/s) on Sample Systems
350 (1400)
700 (1400)
1400 (1400)
Rates in kS/s (kbytes/s) on Sample Systems
30 (120)
35 (70)
35 (35)
Sample rate (peak internally
timed, for small transfers) ..................10 MS/s
Sample rate (peak externally
timed, for small transfers) ..................20 MS/s
Sample rate (min internally timed)......1 S/10 min.
Sample rate (min externally timed) .....No limit
Triton II Chip Set
—
—
—
70 (280)
75 (150)
75 (75)
A-5
Appendix A Specifications
Natoma Chip Set
—
—
—
140 (560)
165 (330)
165 (165)
DIO 6533 User Manual