Mitsubishi Electric FDT125VNVF Technical Manual page 497

Step 2
2. Remove the service panel
Model A
Step 3
3. Remove the front panel
Pull the panel straightforward so that the panel doesn't touch the fan blade.
(7 places)
Model A
Step 4
4. Remove the fan blade if necessary. <Note>
Model A
Step 5
5. Lay down the drain pan heater on the base.
For model A, put the cables rear the fan motor bracket.
Heater
Model A
(3 places)
Model B
(11 places)
Model B
Do not rotate the axis of fan motor when removing the fan blade.
It may cause malfunction of the fan motor.
Heater
Heater
496
-
(4 places)
(16 places)
Model B
Model B, C
-
'12 • PAC-T-174
(4 places)
Model C
Model C
Model C
Heater