Mitsubishi Electric FDT125VNVF Technical Manual page 251

⑥ Operation and setting from remote controller
Setting & display item Description
1. Remote Controller network
Control plural indoor units
A remote controller can control plural indoor units up to 16 (in one group of remote controller network). An address is set to each indoor unit.
1
by a single remote controller
Master/slave setting of remote A maximum of two remote controllers (include option wireless) can be connected to one indoor unit. Set one to "Master" and the other to "Slave".
2
controllers
2. TOP screen, Switch manipulation
1
Menu "Control", "Settings", or "Details" can be selected. (3.-19.)
2 Operation mode "Cooling", "Heating", "Fan", "Dry" or "Auto" can be set.
Set temp. "Set temperature" can be set by 0.5℃ interval.
3
4
Air flow direction "Air flow direction". [Individual flap control setting] can be set.
Fan speed "Fan speed" can be set.
5
Timer setting "Timer operation" can be set.
6
ON/OFF "On/Off operation of the system" can be done.
7
High power SW "High power operation" or "Normal operation" can be selected.
8
9
Energy-saving SW "Energy-saving operation" or "Normal operation" can be selected.
［メ ニュー］ 1番目
3． Energy-saving settin
For preventing the timer from keeping ON, set hours to stop operation automatically with this timer.
1 Auto OFF timer
・ The selectable range of setting time is from 30 to 240 minutes (10minutes interval)
[Administrator password]
・ When setting is "Valid", this timer will activate whenever the ON timer is set.
Power consumption can be reduced by restricting the maximum capacity.
2 Peak-cut timer
Set the [Start time], the [End time] and the capacity limit % (Peak-cut %).
・ 4-operation patterns per day can be set at maximum.
[Administrator password]
・ The setting time can be changed by 5-minutes interval.
・ The selectable range of capacity limit % (Peak-cut %) is from 0% to 40-80% (20% interval).
・ Holiday setting is available.
After the elapse of the set time period, the current set temp. will be set back to the [Set back temp.]
3 Automatic temp. set back
・ The setting can be done in cooling and heating mode respectively.
[Administrator password]
・ The selectable range of the set time is from 20 min. to 120 min. (10 min. interval).
・ Set the [Set back temp.] by 1℃ interval.
［メ ニュー］ 3番目
4． Individual flap control setting
Individual flap control setting The moving range (the positions of upper limit and lower limit) of the flap for individual air outlet port can be set.
［メ ニュー］ 4番目
5. Ventilation
1 External ventilation
On/Off operation of the external ventilator can be done.
・ The settings of [Interlock] with AC (air-conditioner), [Single operation] of ventilator or operation [invalid] of ventilation can be done through
(In combination with
ventilator)
[Ventilation settings] in the [Remote controller] menu.
［メ ニュー］ 7番目
6．
Filter sign reset
1 Filter sign reset The filter sign can be reset.
2 Setting next cleaning date The next cleaning date can be set.
［メ ニュー］ 8番目
7．
Initial settings
1 Clock setting The current date and time can be set or revised.
2 Date and time display [Display] or [Hide] the date and/or time can be set, and the [12H] or [24H] display can be set.
3 Summer time When select [Valid], the +1hour adjustment of current time can be set.When select [Invalid], the [Summer time] adjustment can be reset.
4 Contrast The contrast of LCD can be adjusted higher or lower.
5 Backlight Switching on/off a light can be set and the period of the lighting time can be set within the range of 5sec-90sec (5sec interval).
6 Controller sound It can set with or without [Controller sound (beep sound)] at touching panel.
［メ ニュー］ 9番目
8．
Timer settings
1 Set On timer by hour The period of time to start operation after stopping can be set.
・ The period of set time can be set within the range of 1hour-12hours (1hr interval).
・ The operation mode, set temp and fan speed at starting operation can be set.
2 Set O ｆ ｆ timer by hour
The period of time to stop operation after starting can be set.
・ The period of set time can be set within the range of 1hour-12hours (1hr interval).
3 Set On timer by clock
The clock time to start operation can be set.
・ The set clock time can be set by 5 minutes interval.
・ [Once (one time only)] or [Everyday] operation can be switched.
・ The operation mode, set temp and fan speed at starting operation can be set.
4 Set Off timer by clock
The clock time to stop operation can be set.
・ The set clock time can be set by 5 minutes interval.
・ [Once (one time only)] or [Everyday] operation can be switched.
5 Confirmation of timer settings
Status of timer settings can be seen.
［メ ニュー］ 10番目
9． Weekly timer
1 Weekly timer
On timer and Off timer on weekly basis can be set.
[Administrator password] ・ 8-operation patterns per day can be set at a maximum.
・ The setting clock time can be set by 5 minutes interval.
・ Holiday setting is available.
・ The operation mode, set temp and fan speed at starting operation can be set.
［メ ニュー］ ? ［ 次ペー ジ］ 1番目
10． Home leave mode
1 Home leave mode When leaving home for a long period like a vacation leave, the unit can be operated to maintain the room temperature not to be hotter in summer or not to be colder in winter.
・ The judgment to switch the operation mode (Cooling⇔Heating) is done by the both factors of the set temp. and outdoor air temp.
[Administrator password]
・ The set temp. and fan speed can be set.
250
-
A: Refer to the instruction manual for RC-EX series.
B: Refer to the installation manual for RC-EX series.
C: Loading a utility software vie Internet
○: Nearly same function setting and operations are possible.
△: Similar function setting and operations are possible.
-
'12 • PAC-T-174
RC-EX RC-E4
series RC-E5
○ ○
Ｂ ○
Ａ
Ａ
Ａ ○
Ａ ○
Ａ ○
Ａ ○
Ａ ○
Ａ ○
Ａ
Ａ
Ａ
△
Ａ
Ａ
△
Ａ
Ａ
○
Ａ
Ａ ○
Ａ
○
Ｂ
Ａ
Ａ
△
Ａ
Ａ
Ａ
Ａ
Ａ
Ａ
Ａ △
Ａ △
Ａ △
Ａ △
Ａ
△
Ａ
△
△
Ａ
⑥ O
11． A
1
2
3
4
5
6
12． In
1
2
3
4
5
6
13． R
1
2
3
4
5
6
7
8
9
10
11
14．
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
15． S
1
2
3
4
5
6
16． In
17． P