Table of Contents
Advertisement
Remove adhesive tape from
8
wheel rim.
Braking efficiency is im-
104
paired if the brake pads are
not correctly bedded against the
disks.
Before driving off, check that the
braking effect kicks in without
any delay.
Engage the brakes repeatedly,
continuing until the brake pads
seat against the rotors.
z
Install front wheel cover and fit
screws 1 on right and left.
Removing rear wheel
Make sure ground is level and
firm and place motorcycle on
center stand.
Remove case if necessary.
Burn risk due to hot ex-
haust system.
Do not touch hot parts of the
exhaust system.
Loosen screw 1 of clip and
slide clip toward rear.
Do not remove sealing grease
from clip.
Remove screw 2 for bracket
of end muffler from passenger
footrest.
Pull off end muffler toward rear
and lay on a soft surface.
Shift into first gear.
Advertisement
Table of Contents
