Table of Contents
Advertisement
BMW Motorrad retailer or the
authorized workshop of the TCP/
RDC sensor.
Removing front wheel
Make sure ground is level and
firm and place motorcycle on
its center stand.
Remove screws 1 on left and
right.
Take out front wheel cover to-
ward front while pulling apart
somewhat to side.
Release the two clips 1 retain-
ing the sensor cable on the
brake line.
Mask off areas of wheel rim
that could be scratched in the
process of removing the brake
calipers.
Once the calipers have
been removed, there is
a risk of the brake pads being
pressed together to the extent
that they cannot be slipped back
over the brake rotor on reassem-
bly.
Do not operate the handbrake
lever when the brake calipers
have been removed.
Remove bolts 2 of brake
calipers on left and right.
8
101
z
Advertisement
Table of Contents
