Software Updates; Using A Chargepak - PURE EVOKE MIO Owner's Manual

Energy saving
EVOKE Mio by Orla Kiely is part of the PURE EcoPlus product family, designed and manufactured
to minimize power consumption when the unit is switched on and to use less than 1 Watt in
standby. One way this low power consumption is enabled is by not collecting and storing Intellitext
messages when the unit is in standby. You can override this option by switching off energy saving
mode, but this will increase standby power consumption. Two options are available:
Energy saving On (the default setting)
Updates the Intellitext data when you tune to a station that broadcasts Intellitext. Intellitext data
is not collected in standby.
Energy saving Off
Collects Intellitext data in standby from the last station you tuned to with Intellitext, which
increases standby power consumption.
Note: When you have a ChargePAK E1 fitted (see below) the radio will switch off when you press
the Standby button and not enter standby, as long as it is not connected to mains power.

Software Updates

Software updates for your EVOKE Mio by Orla Kiely may be made available in the future. If you
register your product and include a valid e-mail address you will receive notification of software
updates (register at www.pure.com/register). Alternatively, visit http://support.pure.com at any
time to check for available software updates.
To update your software
Connect your radio to your PC using a suitable A-to-mini B type USB cable. Follow the instructions
provided with the software download at http://support.pure.com
Note: USB update requires a PC (not Mac) with internet access running Windows XP or higher,
and a suitable USB cable (not included).

Using a ChargePAK™

ChargePAK E1 is an optional rechargeable battery pack which plugs into the socket in the radio's
battery compartment. Whenever your radio is connected to a mains supply, the ChargePAK will
be charging and the power remaining will be available to view as a percentage in the Information
display options (see page 5).
To purchase a PURE ChargePAK E1, contact your nearest PURE dealer or visit the shop on our
website at www.pure.com
Important: EVOKE Mio by Orla Kiely can only be powered with a ChargePAK E1 and is not
compatible with any other batteries, either disposable or rechargeable, or any other ChargePAK
model. Always switch the unit off and disconnect it from mains power before inserting or removing
a ChargePAK. Charge a new ChargePAK for 24 hours before first using battery power. Carefully
follow the fitting instructions that are supplied with the ChargePAK.
12
(Menu > Energy saving)