Presets And Intellitext; Intellitext; Storing And Selecting Presets - PURE EVOKE MIO Owner's Manual

Setting the sleep timer
EVOKE Mio has a sleep timer that switches your radio into standby (or off if powered by a
ChargePAK) after a number of minutes has elapsed.
To set a sleep timer
1. Press the Timer button, rotate the dial to display 'Sleep timer' then push the dial to select.
2. Rotate the dial to increase the duration of the sleep timer from 15 to 90 minutes in fifteen
minute intervals. Press the dial to start the sleep timer.
The time remaining until shut-down is displayed on the right of the full-screen clock view.
Tune
To cancel a sleep timer
Press and hold the Timer button until you see the message 'Timers cleared'.

Presets and Intellitext

Store and select preset stations > Browse Intellitext

Storing and selecting presets

Store up to 30 of your favourite digital or FM radio stations in a combined list.
To quick-store a station to a preset button (1–5)
Tune to the digital or FM radio station you want to store. Press and hold one of the numbered
Preset buttons (1–5) for two seconds until you see the 'Preset saved' message on the bottom line.
BBC Radio 6Music
Now playing: No Cars G
To store a station to the preset list (1–30)
1. Tune to the digital radio or FM radio station you want to store.
2. Press and release the 6+ button to view the numerical list of stored presets, then turn the
Tune dial to choose any Preset number between 1 and 30. You can overwrite existing presets.
3. Press and hold the 6+ button (or the Tune dial) for two seconds until you see the 'Preset
saved' message. The current digital/FM radio station is now stored to that number.
8
Sleep off
45 minutes
Preset 06
Empty preset
Tune
2
or
Tune
2
Tune
2
theJazz
Preset 10 saved
08:30
BBC Radio 6Music
Preset 1 saved
Preset 10
Empty Preset
45