To Cancel A Sounding Tone Or Radio Alarm - PURE EVOKE MIO Owner's Manual

7. If you have selected a digital or FM radio alarm you can push the Tune dial to select 'Alarm
volume' and turn to adjust the volume level for the alarm from 1 (very quiet) to 32 (very
loud).
08
Alarm volume
That's it! You can see if the alarm is currently switched on in the 'Full screen time' display (see
page 5). Alarms can be set and adjusted from standby by pressing the Timer button.
08:30
The alarm is set to
sound at 8:30 am

To cancel a sounding tone or radio alarm

When a tone alarm is sounding, push the Tune dial or press Standby to cancel the alarm. To
cancel a digital radio or FM radio alarm and return the radio to standby, press the Standby
button.
08:30
08:30
Kitchen timer
EVOKE Mio has a countdown timer which will sound an alarm after a set time period.
To set a kitchen timer
1. Press the Timer button, turn the Tune dial and push to select 'Kitchen timer'.
2. Turn the Tune dial to change the hours and push to confirm. Turn again to change the minutes
and push to confirm and start the countdown timer.
Tune
01 hours 00 mins
The alarm will sound after the time period you have set whether the radio is on or in standby
Cancel the beeping alarm tone by pressing any button on the radio.
To stop and reset the kitchen timer to zero
To stop and reset the kitchen countdown timer to zero before it sounds a beeping tone, press and
hold down the Timer button for three seconds until you see the message 'Timers cleared'.
Timer imer
Tune
t
22:45
08:30
Tune
Tune
Timers cleared
Tune
10
or
Standby
Tune
01 hours 25 mins
Tune
(
An outlined bell
shows that the alarm
will not sound within
the next 24 hours.
Tune
EN
7