Using Power Saving Mode; Changing The Language; Resetting To Factory Settings; Updating The Software - PURE Move T4 User Manual

Using power saving mode

You can enable the power saving mode to increase the battery life of your Move.
When your Move is in power saving mode, it automatically uses a low-power
equaliser setting, and the display always turns off after 10 seconds of inactivity.
1. Press Menu.
2. Press and Select to choose Settings > Power saving > On.

Changing the language

1. Press Menu.
2. Press and Select to choose Settings > Language.
3. Press and Select to choose a language.

Resetting to factory settings

If you reset your Move to factory settings, it removes stored presets, clears the
station list and resets all settings to default.
You cannot undo a factory reset.
1. Press Menu.
2. Press and Select to choose Settings > Factory reset.
3. Press and Select to choose Yes.

Updating the software

We may provide software updates to improve your Move. To check for available
software updates, visit support.pure.com.
25