Help And Specifications; Secondary And Inactive Stations; Hints And Tips; Software Updates - PURE verona Owner's Manual

Help and Specifications

Secondary and inactive stations

(<</>>) Secondary DAB services
Secondary services accompany some stations, providing extra information or alternative content
and may only be broadcast at certain times. If a station has secondary services available, the
station shows '>>' next to its name in the station list and the secondary service appears next to
the station in the list. A secondary service has a '<<' before its name in the station list.
(?) Inactive or unavailable DAB stations
Inactive or unavailable stations appear on the station list preceded by '?' and cannot be tuned
to. A station may be inactive or unavailable because the station is not broadcasting at the current
time (check with the station), you are out of range, or it has stopped broadcasting altogether.

Hints and tips

Display says 'No stations available' or ' Station not available'
Use Autotune (> page 11) to search for stations. Try adjusting your aerial or radio position.
Receiving new DAB stations that have started broadcasting
Use Autotune (> page 11) to scan for new stations and add them to the station list.
Using the alarm when a ChargePAK E1 is fitted
When the radio is powered by a ChargePAK E1 for portable listening, i.e., a ChargePAK
rechargeable battery is fi tted and the unit is not connected to mains power, the radio switches off
completely when the Standby button is pressed and the alarm will not sound. In this case, the
message 'Disabling alarm' will be displayed when the Standby button is pressed.
Resetting your radio
Resetting your radio removes all presets, clears the station list and resets all options to defaults.
1. Press and hold the Menu button for four seconds.
2. Turn and push the Tune dial to select 'Factory Reset'.
3. Push the Tune dial again within 8 seconds to confi rm the reset, or the reset will cancel.

Software Updates

Visit support.pure.com to check for software updates for Verona.
To update your software
Connect your radio to your PC using a suitable A-to-mini-B type USB cable (not included).
Follow the instructions provided with the software download.
Note: USB update requires a PC with internet access running Microsoft
®
Windows XP/Vista.
EN
13