Res Ecu Preparation - Toyota PT398-47091 Installation Manual

TOYOTA PRIUS
PROCEDURE
Nylon Panel Removal Tool, Flat Blade Jeweler's Screwdriver,
Electrical Tape
Issue : D 05/22/09
201 0–
Fig. 2-5
Fig. 3-1
Fig. 3-2
Page 12 of 33
REMOTE ENGINE STARTER (RES)
f. Release the Back Clips on
both sides.
g. Release the Front Clips on
both sides.
• Turn the Steering wheel from
Right to Left to access the Holes.
• Use a Flat Blade Jeweler's Screw-
driver wrapped with Electrical
Tape to release the clips.
3. RES ECU Preparation.
a. Install the Bracket to RES
ECU.
b. Attach a piece of Foam Tape
to the RES ECU.
TVIP V4