Toyota PT398-47091 Installation Manual page 16

TOYOTA PRIUS
PROCEDURE
10mm Socket
Side Cutters
Issue : D 05/22/09
201 0–
Fig. 4-7
Fig. 4-8
Page 16 of 33
REMOTE ENGINE STARTER (RES)
V4/V5 ADD ON ONLY
i. Attach GBS Bracket and RES
Bracket.
j. Install the RES ECU with
GBS Bracket.
CAUTION: Do not drop the Bolt
and Washer.
k. Plug the V5 8P Connector to
the GBS ECU.
l. Dislodge the Vehicle's
Harness Shielding.
• Release 1 Clip.
m. Route the V4 Harness along
the Vehicle Harness towards
the Driver's Cowl Area.
n. Reinstall the Vehicle's Har-
ness Shielding.
o. Secure the V4 Harness to the
Vehicle Harness Shielding
with 1 Wire Tie.
TVIP V4