TOYOTA
PRIUS
PROCEDURE
Flat Blade Jeweler's Screwdriver
WIRE SIDE
Issue : D 05/22/09
Vehicle Connecotr-02
Example
Example
201 0–
Fig. 4-3
Fig. 4-4
Fig. 4-1
Fig. 4-5
Fig. 4-2
Page 14 of 33
REMOTE ENGINE STARTER (RES)
c.
Using Flat Blade Jeweler's
Screwdriver remove the
Black Connector Lever.
•
Do not force the Lever.
d.
Lift up the Terminal Retainer
Clip.
•
Do not pull out the Retainer Clip.
e. Insert the V4 Red Wire
Terminal into the indicated
location on the 36P Vehicle
Connector.
•
Close the Terminal Retainer Clip.
VERIFY: Terminal Pins are
properly inserted and do not
come out.
f.
Re-attach the Black Connec-
tor Lever.
g.
Reconnect the Vehicle Con-
nectors.
TVIP V4