TOYOTA
TUNDRA
Procedure
Fig. 6-1
Fig. 6-2
Fig 6-3
10mm Socket
Fig 6-4
Issue: E
04/07/10
2010 -
REMOTE ENGINE STARTER (RES)
6. RES ECU Preparation and Installation.
(a) Attach the RES ECU Bracket to the RES
ECU as shown. (Fig. 6-1)
(b) Attach 2 pieces of Large Foam Tape to the
sides of the RES ECU as shown. (Fig. 6-2)
(c) Attach 1 Small Foam Tape on top of the
RES ECU. (Fig. 6-2)
(d) Insert the V4 RES ECU Mounting Plate
through the Hole on the side of the Dash.
(Fig. 6-3)
(e) Install the RES ECU as shown using 2 Nuts
from the Kit. (Fig. 6-4)
Page 25 of 44 pages
TVIP V4