TOYOTA
PRIUS
PROCEDURE
10mm Wrench
Issue : D 05/22/09
201 0–
Fig. 1-2
Fig. 1-3
Fig. 1-4
Fig. 1-3
Page 6 of 33
REMOTE ENGINE STARTER (RES)
c.
Remove the Rear Box.
d.
Remove the Rear Trims to
gain access to the Battery.
e.
Disconnect the Negative
Battery Terminal.
•
Note the Battery Cable Position
as it will be re-installed in the
same position.
CAUTION: Do not touch the
Positive Terminal.
f.
Swap the Bolt and Nut on the
Negative Battery Terminal
from one side to the other for
easier installation.
TVIP V4