Maytag MDE6700A Series Technical Information page 6

Troubleshooting Procedures
To avoid risk of electrical shock, personal injury, or death, disconnect power to dryer before servicing, unless
testing requires power.
Heating Element (Electric)
°
160 C ,25A 127/99
thermal cut-off HI-limit
• Measure resistance of the following terminal
1) Door switch knob : open
Terminal : "COM" - "NC" (1-3) : ∞ Ω
Terminal : "COM" - "NO" (1-2) < 1Ω
2) Door switch push : On
Terminal : "COM" - "NC" (1-3) : ∞ Ω
Terminal : "COM" - "NO" (1-2) < 1Ω
125V/10A
Light resistance 80~100 Ω (Violet & gray)
120V/10W(E12)
• Belt Cut-off S/W
- Lever open : Resistance value < 1Ω
- Lever push : Resistance value
16026881
RPL 16026540
!
°
C ,25A
240V/5300W
WARNING
• Motor (Electronic & GAS)
Contacts
Function
Start
Run
= Contact closed
Centrifugal Switch (Motor)
Radiant Sensor (Gas)
Resistance across terminal indicates a closed switch
TH2 Hi-Limit (Gas)
Less than 1 ohm
6
1M 2M 3M
September 2006
©2006 Maytag Services
5M 6M