National Instruments Data Acquisition Device NI USB-621x User Manual page 149

Appendix A Device-Specific Information
Note For more information about default NI-DAQmx counter inputs, refer to Connecting
Counter Signals in the NI-DAQmx Help or the LabVIEW Help in version 8.0 or later.
USB-6212/6216 Mass Termination Cables and Accessories
NI USB-621x User Manual
Table A-4. Default NI-DAQmx Counter/Timer Pins
Counter/Timer Signal
CTR 0 SRC
CTR 0 GATE
CTR 0 AUX
CTR 0 OUT
CTR 0 A
CTR 0 Z
CTR 0 B
CTR 1 SRC
CTR 1 GATE
CTR 1 AUX
CTR 1 OUT
CTR 1 A
CTR 1 Z
CTR 1 B
FREQ OUT
This section describes some cable and accessory options for
USB-6212/6216 Mass Termination devices. Refer to
accessory options including new devices.
SCC Accessories
SCC provides portable, modular signal conditioning to your DAQ system.
To connect your USB-6212/6216 Mass Termination device to an SCC
module carrier, such as the SC-2345, SC-2350, or SCC-68, use an
SH68-68-EPM shielded cable. The SCC carrier must be externally
powered when used with a USB-6212/6216 Mass Termination device.
Refer to the +5 V Power
Information, and the NI USB-621x Specifications for more information.
Default Terminal Number (Name)
section of Chapter 3,
A-10
37 (PFI 8)
3 (PFI 9)
45 (PFI 10)
2 (PFI 12)
37 (PFI 8)
3 (PFI 9)
45 (PFI 10)
42 (PFI 3)
41 (PFI 4)
46 (PFI 11)
40 (PFI 13)
42 (PFI 3)
41 (PFI 4)
46 (PFI 11)
1 (PFI 14)
for other
ni.com
Connector and LED
ni.com