Simrad CE34 ChartSounder Manual page 116

Chapter 7-18
User data generated by other chartplotter models e.g. CE33/40/42/52,
CP33/40/42/52, CA40/42/52, CR40/42/52 can all be transferred to a
CE34/44/54 unit via the Data transfer system.
However, it is not immediately accessible to transfer data via Data-
Card from the new model CE34/44/54 to the older model CE42, etc.,
as this would require an update of the CE42.
- For more information, please contact an authorized Simrad dealer.
Load from DataCard:
Data generated by:
Used internal memory:
Used DataCard memory:
Used internal memory after operation: 191400 bytes =
Date saved:
Time saved:
Name:
Data type
Marks/waypoints:
Lines:
Routes:
Targets:
Tracks:
Setup:
MENU
Exit
Use the cursor key to go to the 'Action' column to decide which
action you want taken for each mentioned category of data (toggle
with +/- keys) - see section 7.9.1.
If you choose to MERGE the data already stored in the Internal
memory with the data coming from the DataCard, the bottom line in
the window will ask you to press [ENT] to: Calculate databank after
merge.
Press [ENT] to activate 'Load selected data from DataCard'
ENT
You will now receive a warning about which data in the internal
memory of the unit will be overwritten. Press [ENT] to accept.
After the data has been transferred, you will receive a status report.
Internal DataCard
Amount Bytes Amount Bytes
9 244 11
0 0
1 168
0 0
8 190480
1 2501
Load selected data from DataCard
CE34/44/54 Waypoint / route menu
DATABANK-1
193393 bytes =
2677 bytes =
Internal
after
Amount Bytes
256 9
2 168 2
4 408 4
1 100 1
0 0 8 190480
1 1745 0
Simrad CE44
42%
1%
42%
15-02-2003
19:43:00
Action
244 NO
168 OVERWRITE
408 OVERWRITE
100 OVERWRITE
NO
0 NO
ENT