Mitsubishi H2i-R2-1 Manual page 263

8. OPTIONAL PARTS
8-5. Snow/Hail Guards Kit
● Protects outdoor unit coil surfaces from hail damage and snow build-up in severe climates.
● 20-gauge, hot-dipped galvanized G-90 steel construction.
● Heavy-duty polyester-based powder paint finish to match equipment.
● Installs easily using existing wire guard fasteners
Notes:
● Outdoor unit must be mounted at least 12" off the ground or 12" above the highest average snow depth, whichever is greater.
● Clearances for the sides and back of the outdoor unit must be at least 17" greater than standard installation guidelines.
● For best coil protection, two and three module units must be mounted with the minimum 1-3/16" separation.
● For best snow and hail protection use SHK-1 with SGK series snow/hail guards.
Kit Number
SGK-1 Side Snow/Hail Guards 19-1/8" wide (2 per kit)
SGK-2 Rear Snow/Hail Guard 31-3/4" wide
SGK-3 Rear Snow/Hail Guard 43-1/2" wide
SHK-1 Snow Hood for Snow/Hail Protection
Components Required per Outdoor unit(s)
For models with two or three units, selections are based on a distance of 1-3/16" separation between the modules.
For further separation between the modules, additional components may be required.
PURY-HP-T(S)KMU-A-H Series
Unit model
PURY-HP72TKMU-A-H
PURY-HP96TKMU-A-H
PURY-HP144TSKMU-A-H
PURY-HP192TSKMU-A-H
PURY-HP-Y(S)KMU-A Series
Unit model
PURY-HP72YKMU-A
PURY-HP96YKMU-A
PURY-HP144YSKMU-A
PURY-HP192YSKMU-A
© 2014 Mitsubishi Electric US, Inc.
Description
Module Size
S L XL SGK-1
1 1
1 1
2 1
2 1
Module Size
S L XL SGK-1
1 1
1 1
2 1
2 1
PURY-HP-T(S)KMU,-Y(S)KMU (September 2014)
Net Weight Ship
Weight
(2) x 18 lbs. 41 lbs.
19 lbs. 24 lbs.
24 lbs. 29 lbs.
41 lbs. 47 lbs.
Component Qty
SGK-2 SGK-3 SHK-1
1 1
1 1
2 2
2 2
Component Qty
SGK-2 SGK-3 SHK-1
1 1
1 1
2 2
2 2
Carton Dimensions L x W x H
52"L x 20"W x 20"H
52"L x 33"W x 20"H
52"L x 45"W x 20"H
32"L x 34"W x 30-1/2"H
H2i-R2-263