Napoleon Arlington GVFS20N Installation And Operation Instructions Manual page 8

8
CAST FRONT INSTALLATION
AND REMOVAL
1. Lift the top cast piece off of the unit.
2. Detach the front cast piece from the side pieces by remov-
ing the screws from the brackets located in the upper inside
corners.
3. Slide the front straight up to remove.
3
FRONT
Follow the above steps in reverse in order to reinstall
the cast front. Ensure that the tabs on the underside of
the front fi t behind the front legs.
W415-0559 / 02.15.06
FINISHING
2
SCREWS
BRACKET
SCREEN INSTALLATION
AND REMOVAL
1. Unscrew the four screws (one in each corner) from the
screen.
2. Remove screen from unit
FRONT
TAB
FRONT
LEGS
Follow the above steps in reverse in order to reinstall
the screen.
Four
Screws