Napoleon BGNV36N Installation And Operation Instructions Manual

Millivolt system vented gas fireplace natural and propane gas model

Advertisement

INSTALLER: THESE INSTRUCTIONS MUST BE CONVEYED TO AND REMAIN WITH THE HOMEOWNER.
CERTIFIED UNDER CANADIAN AND AMERICAN NATIONAL STANDARDS, CSA 2.22, AND ANSI Z21.50 RESPECTIVELY FOR VENTED GAS FIREPLACES.
WARNING: If the information in these instructions is not followed exactly, a fire or
explosion may result causing property damage, personal injury or death.
Do not store or use gasoline or other flammable vapours and liquids in the vicinity of
• Do not try to light any appliance.
• Do not touch any electrical switch.
• Do not use any phone in your building.
Installation and service must be performed by a qualified installer, service agency or
the gas supplier.
R-2000
Wolf Steel Ltd., 24 Napoleon Rd., Barrie, ON L4M 4Y8 Canada • (705)721-1212 • fax(705)722-6031

MILLIVOLT SYSTEM

INSTALLATION AND OPERATION INSTRUCTIONS FOR
VENTED GAS FIREPLACE
NATURAL GAS MODEL
PROPANE GAS MODEL
CERTIFIED FOR CANADA AND UNITED STATES USING ANSI / CSA METHODS
FOR YOUR SAFETY
this or any other appliance.
WHAT TO DO IF YOU SMELL GAS:
www.napoleonfireplaces.com • ask@napoleon.on.ca
BGNV36N
BGNV36P
• Immediately call your gas supplier from
a neighbour's phone. Follow the gas
supplier's instructions.
• If you cannot reach your gas supplier, call
the fire department.
1
W415-0275 / C / 09.23.05

Advertisement

Table of Contents
loading

Summary of Contents for Napoleon BGNV36N

  • Page 1: Millivolt System

    Wolf Steel Ltd., 24 Napoleon Rd., Barrie, ON L4M 4Y8 Canada • (705)721-1212 • fax(705)722-6031 www.napoleonfireplaces.com • ask@napoleon.on.ca MILLIVOLT SYSTEM VENTED GAS FIREPLACE BGNV36N BGNV36P FOR YOUR SAFETY this or any other appliance. • Immediately call your gas supplier from a neighbour's phone.
  • Page 2: Trouble Shooting Guide

    PG 2-4 INTRODUCTION Warranty General Instructions General Information Care of Glass & Plated Parts 5 VENTING Safety Switch Hi Limit Switch Venting Action Check 6-7 INSTALLATION Gas Installation Framing Nailing Tab Installation Mantle Clearances 8-9 FINISHING Door Opening & Closing Louvre Installation Log Placement Charcoal &...
  • Page 3 NAPOLEON products are manufactured under the strict Standard of the world recognized ISO 9001 : 2000 Quality Assurance Certificate. NAPOLEON products are designed with superior components and materials, assembled by trained craftsmen who take great pride in their work. The burner and valve assembly are leak and test-fired at a quality test station.
  • Page 4: General Instructions

    GENERAL INSTRUCTIONS This gas fireplace should be installed and serviced by a qualified installer to conform with local codes. Installation practices vary from region to region and it is important to know the specifics that apply to your area, for example: in Massachusetts State: •...
  • Page 5: Safety Switch

    This is a vented appliance and must be connected to a chimney in accordance with the current installation codes. In absence of local codes, install to the current National Fuel Gas Code, ANSI Z223.1, or the current CAN/CGA B149, Installation Codes. This model can be common-vented. A minimum four inch diameter (4"ø) B-vent or class A vent is required.
  • Page 6: Gas Installation

    GAS INSTALLATION Proceed once the vent installation is complete. 1. Move the fireplace into position and secure using the nailing tabs and/or secure to the floor through the 1/4"ø holes located at either end of the base. 2. Route a 3/8" N.P.T. black iron gas line, 1/2" type-L copper tubing or equivalent to the fireplace.
  • Page 7: Nailing Tab Installation

    NAILING TAB INSTALLATION 1) Attach the nailing tabs to the corner posts using the 2 sheet metal screws sup- plied. Secure through the centre of the top and bottom slots in the nailing tab and then through the existing holes in the corner posts.
  • Page 8: Door Opening & Closing

    DOOR OPENING & CLOSING The upper louvres must be FLANGE removed to allow the door to be opened or closed. To access the lower door latch, open the valve con- trol door. Release the top UPPER LOUVRE and bottom door latches, lo- cated at the right side of the door.
  • Page 9: Log Placement

    LOG PLACEMENT PHAZER logs and glowing embers exclusive to Napoleon Fire- places, provide a unique and realistic glowing effect that is different in every installation. Take the time to carefully po- sition the glowing embers for a maximum glowing effect. Log colours may vary.
  • Page 10: Optional Blower Installation

    OPTIONAL BLOWER INSTALLATION INSTALLATION TO BE DONE BY A QUALIFIED INSTALLER and must be electrically connected and grounded in accordance with local codes. In the ab- sence of local codes, use the current CSA C22.1 FIGURE 20 CANADIAN ELECTRICAL CODE Canada ANSI/NFPA 70 NATIONAL...
  • Page 11: Optional Fan Installation

    OPTIONAL FAN INSTALLATION ELECTRICAL INSTALLATION TO BE DONE BY A QUALI- FIED INSTALLER and must be connected and grounded in accordance with local codes. In the absence of local codes, use the current CSA C22.1 CANADIAN ELECTRICAL CODE in Canada or the ANSI/NFPA 70 NATIONAL ELECTRICAL CODE the United States.
  • Page 12 OPERATION / MAINTENANCE Purge all gas lines with the glass door of the fireplace opened. Assure that a continuous gas flow is at the burner before closing the door. When lit for the first time, the fireplace will emit a slight odour for a few hours.
  • Page 13: Maintenance

    MAINTENANCE Turn off the gas and electrical power before servicing the fireplace. CAUTION: Label all wires prior to disconnection when serv- icing controls. Wiring errors can cause improper and dan- gerous operation. Verify proper operation after servicing. This fireplace and its venting system should be inspected before use and at least annually by a qualified service per- son.
  • Page 14: Replacement Parts

    Contact your dealer or the factory for questions concerning prices and policies on replacement parts. Normally all parts can be ordered through your Napoleon dealer or distributor. FOR WARRANTY REPLACEMENT PARTS ORIGINAL INVOICE WILL BE REQUIRED TO HONOUR THE CLAIM IDENTIFIES ITEMS WHICH ARE NOT ILLUSTRATED REPLACEMENT PARTS PART NO.
  • Page 15 W415-0275 / C / 09.23.05...
  • Page 16: Troubleshooting Guide

    TROUBLE SHOOTING GUIDE EFORE ATTEMPTING TO TROUBLESHOOT SYMPTOM PROBLEM Main burner goes Pilot flame is not large out; pilot stays on. enough or not engulfing the thermopile Thermopile shorting Remote wall switch wire is too long; too much resist- ance in the system. Faulty thermostat or switch.
  • Page 17 SYMPTOM PROBLEM Pilot goes Gas piping is undersized. while standing; Main burner is in 'OFF' position. Flames are con- Unit is over-fired or under- sistently too large fired. small. Carboning occurs. Carbon is being Air shutter has become deposited blocked glass, logs or com- Flame is impinging on the bustion chamber...
  • Page 18 W415-0275 / C / 09.23.05...
  • Page 19 NOTES W415-0275 / C / 09.23.05...
  • Page 20 NOTES W415-0275 / C / 09.23.05...

This manual is also suitable for:

Bgnv36p

Table of Contents