Assembly - Husky H1301F Operator's Manual

KNOW YOUR AIR COMPRESSOR
See Figure 2.
Before attempting to use this product, familiarize yourself
with all operating features and safety rules.
AIR OUTLETS
The two air outlets located on the front of the air compres-
sor are pre-adjusted for ease of use, one to 40 PSI and
one to 90 PSI. Choose the proper outlet based on the
amount of air pressure needed for your application. Both
outlets feature a quick connect coupler, allowing easy
installation and removal of the air hose.
BUILT-IN CORD WRAP
A built-in cord wrap is provided for convenience in moving
and storing the unit.
UNPACKING
This product has been shipped completely assembled.
n Carefully remove the tool and any accessories from the
box. Make sure that all items listed in the packing list
are included.
n Inspect the tool carefully to make sure no breakage or
damage occurred during shipping.
n Do not discard the packing material until you have
carefully inspected and satisfactorily operated the tool.
n If any parts are damaged or missing, please call
1-866-340-3912 for assistance.
PACKING LIST
Air Compressor
Coil Hose
Blower Attachment with Safety Nozzle
Air Chuck
Inflation Nozzles (2)
Inflation Adapter
Inflation Needle
1/4 in. NPT Quick Coupler
1/4 in. NPT Male Connector Fitting (2)
1/4 in. NPT Female Connector Fitting
Seal Thread Tape
Operator's Manual
Registration Card
FEATURES
OIL-FREE UNIVERSAL MOTOR
Your air compressor features permanently lubricated bear-
ings.
SAFETY VALVE
The safety valve is designed to automatically release air if
the air receiver pressure exceeds the preset maximum.
TANK PRESSURE GAUGE
The tank pressure gauge indicates the pressure of the air
in the tank.

ASSEMBLY

WARNING:
If any parts are damaged or missing do not operate this
tool until the damaged or missing parts are replaced.
Failure to do so could result in possible serious personal
injury.
WARNING:
Do not attempt to modify this tool or create accesso-
ries not recommended for use with this tool. Any such
alteration or modification is misuse and could result
in a hazardous condition leading to possible serious
personal injury.
WARNING:
To prevent accidental starting that could cause serious
personal injury, always remove the battery pack from the
tool when assembling parts.
11