Table of Contents
Advertisement
A C T I V A T E
B E L L T E S T
D I S P L A Y
S Y S T R B L
D I S P L A Y
F I R E A L A R M
D I S P L A Y
F I R E T R B L
A C T I V A T E
C H I M E
A C T I V A T E
W A T C H
16
K E Y P AD F U N C T I O N S
Activate Bell Test?
battery test. If the alarm does not sound, call for service.
Y / N
•
If the battery is low, a "LOW BATTERY E02-00 SERVICE" will appear in the display
indicating a low battery condition. Allow 24 hours for the battery to recharge. If the trouble
continues, call for service.
Display System Troubles?
problem detected in the system. (See SYSTEM TROUBLE ERROR CODES for a full
Y / N
description of these codes.) Use NEXT(
(Note: This function available with GEM-P9600 and GEM-P3200 control panels only).
Display Fire Alarms?
NEXT and PRIOR Buttons to scroll zones (required for GEM-P3200/9600 panels. GEM-
P816/1632/1664 panels will auto-scroll).
Y / N
Display Fire Troubles?
(s). Use NEXT(
E
panels. GEM-P816/1632/1664 panels will auto-scroll).
Y / N
Activate Chime?
zone is faulted while disarmed. To deactivate the Chime Mode, re-enter the Function Mode and
when "DEACTIVATE CHIME" is displayed, press YES (
Y / N
disabled while armed. Chime is disabled for Protected zones while armed, Never Armed zones
(such as a driveway sensor) will continue to chime when system is armed.
Activate Watch Mode?
feature simultaneously turns on all zones designated as Day Zones, which will cause an
Y / N
indication at the keypad if a zone is opened while the system is disarmed. To deactivate the
Watch Mode, arm, then disarm. All Day Zones will revert to regular Burglary Zones. Note: The
Watch Mode is disabled while armed.
P3200 control panels only).
Activates the alarm (while disarmed) for about 2 seconds and performs a
Displays 1- or 2-digit error code along with a description of a
) and PRIOR (
E
Displays alarms that have occurred on the Fire Zone(s). Press the
Displays trouble conditions that have been detected on the Fire Zone
) and PRIOR (
) to scroll zones (required for GEM-P3200/9600
F
The Chime Mode will sound a tone at the keypad when the programmed
(Optional - Watch Mode programmed?
(Note: This function available with GEM-P9600 and GEM-
) to scroll system troubles.
F
). Note: The Chime Mode is
E
YES
NO) This optional
Advertisement
Table of Contents
