Table of Contents
Advertisement
Operation instructions
Fig. 48 Connecting power supply cord
[1]
Power cord length: 3ft.
Note: The outlet the appliance is plugged into should be clear from
possible water damage.
5.2
Position of the fuses in control unit
To check fuses, proceed as follows:
▶ Remove the front cover, see fig. 4, page 8.
▶ Remove the three screws from the control unit.
Fig. 49
6
Operation instructions
1
2
3
Fig. 51
[1]
On/Off button
[2]
Reset button
[3]
Program Key
[4]
LCD display
[5]
Up button
[6]
Down button
[7]
Power On or stand-by LED
6.1
Description LCD Display
WARNING:
▶ Do not use any cleaning aggressive or corrosive
agents to clean the window.
34
▶ Remove the six screws from the back cover of the control unit, see
fig. 50, pos. 2.
▶ Check the fuses in the printed circuit board, see fig. 50, pos. 3.
Fig. 50 Fuses position
▶ After checking the fuses, reinstall all parts in reverse order.
4
5
6
7
6720608920-10. 1 AL
Fig. 52 Power bar indicator (input)
RTG 199 HE – 6 720 811 617 (2016/01)
Hide quick links:
Advertisement
Table of Contents
