D-Link DSM-G600 Instruction Manual page 26

DSM-G600 User's Manual
Using the Setup Wizard (continued)
When selecting Access Point mode, you
will need to enter the following network
settings:
SSID - Enter the SSID or network name.
Channel - Select the channel of your
wireless network (1-11).
802.11g Only Mode - Select Enabled
if all your wireless devices are 802.11g,
otherwise select Disabled.
SSID Broadcast - Select Enabled to allow
your SSID to be seen by any wireless
device.
Security - Select to enable WEP, WPA,
or WPA-PSK security.
Click Next.
For more information on WEP, WPA-PSK, and WPA security, please refer to page 29.
If you select WPA, enter the following
information:
Encryption - Select TKIP or AES.
RADIUS Server IP - Enter the IP
address of your RADIUS server.
Port - Enter the port used.
Shared Secret - Enter the key used.
This key will need to be exactly the
same as on your clients.
Click Next.
D-Link Systems, Inc.
Using the Configuration Utility
26