Table of Contents
Advertisement
DNS-120 User's Manual
Using the Configuration Utility
Home > LAN
DHCP Client/
Select either DHCP Client (default) if you have a DHCP server or
Static IP:
router on your network, or Static IP if you want to assign the network
settings manually.
IP Address:
Enter the IP address of the DNS-120 here, when Static IP is
selected.
Subnet Mask:
Enter the subnet mask here, when Static IP is selected.
Gateway Address:
Enter the gateway address here, when Static IP is selected. This is
normally the LAN address of your router.
DNS1/DNS2:
DNS (Domain Name System) is an Internet service that translates
domain names into IP addresses. Enter a DNS address here. If you
are using a router in your network, you can usually enter the router's
LAN IP address as the DNS address.
Apply:
Click Apply to save the changes.
18
D-Link Systems, Inc.
Advertisement
Table of Contents
