Hardware Installation - D-Link DSM-G600 Instruction Manual

DSM-G600 User's Manual

Hardware Installation

WARNING: Disconnect the power cord before inserting or removing the
internal hard disk drive.
A. Unscrew the two screws on the
back panel of the DSM-G600 to
remove the cover.
B. Connect the IDE cable to the IDE
cable connector on your hard
drive.
Note: Make sure the jumper setting
on your hard drive is set to Master
or Cable Select.
C. Connect the power cable to the power
connector on your hard drive.
D-Link Systems, Inc.
Hardware Installation
9