Redialing Numbers; Ending Calls; Using Headsets - Polycom VVX 500 User Manual

Polycom VVX 500 and VVX 600 Business Media Phones and Polycom VVX Camera User's Guide
2 From your Directory, tap the contact you want to call.
3 From the contact's information screen, tap the contact's phone number. The call is automatically
placed.

Redialing Numbers

To dial the last number you called, open the Dialer. The first number in the list is the last call you placed.
To redial a number:
1 From the Dialer (shown next), tap the first number in the list.
2 Place the call.

Ending Calls

To quickly end an active call, replace the handset, or press
Calls view, tap End Call. If you're in Calls view, be sure to highlight the call first.
Note: How Do I End a Held Call?
A call must be active to end it. To end a held call: From Calls view, tap the held call to highlight it,
tap Resume, and then tap End Call.

Using Headsets

You can connect an analog and/or USB headset to your phone. If an analog headset is connected and in
use, glows green. If a USB headset is connected and in use,
USB headset are connected, the USB headset will be used. If two USB headsets are connected, the
headset you connected first will be used.
If you use a headset, you can set up your phone so that all calls use your headset (see
Memory Mode). If you use a headset that supports electronic hookswitch (EHS), you can use the controls
on your headset to answer and end calls. In addition, you may be able to mute calls and control volume
from your headset.
Polycom, Inc.
or . Or, from Active Call, Lines, or
glows blue. If both an analog and
Enabling Headset
36