Polycom VVX 500 User Manual page 87

Polycom VVX 500 and VVX 600 Business Media Phones and Polycom VVX Camera User's Guide
 Enable the PIP to display over full-screen video ('PIP mode'), as shown next.
To change the way the PIP displays:
1 Tap Settings from Home view, and tap Basic > Video > Local Camera View.
2 From the Local Camera View screen, tap, and then adjust the following settings:
Local Camera View (Full Screen)—Enables or disables the PIP from displaying when you

view video on the full screen. The default setting is Enabled.
Local Camera View Mode (Full Screen)—Sets whether you want the PIP to display over, or

next to, full-screen video. Select one of these settings:
Side-by-Side—Displays the PIP next to, rather than over, full-screen video.

PIP—Displays the PIP over full-screen video.

The default setting is Side-by-Side.
Note: How Do I Display Full-Screen Video Without the Black Bars?
If you select PIP, as well as update the way full-screen video displays (by choosing Full or Crop
mode), the full-screen video will display on the entire screen without the black sidebars. To choose
Full or Crop mode, see
3 Tap Save.
Setting the Call Rate for Video Calls
You can set the maximum bandwidth to use for a video call. The call rate you select applies to your next
video call.
Polycom, Inc.
Changing How Non-PIP Video Displays.
87