Setting up
9
Inserting the needles on the PFAFF 1426
.02
9 - 2
1
Fig. 9 - 02
If the needle bar is adjusted accordingly, it is also possible to use needle
system 134.
The choice of needle depends on the model of the machine and the thread
and material used for sewing (see Chapter 3, Specifications).
Switch the machine off!
Danger due to unintentional
starting of the machine!
Only use needles of system 134-35!
Set needle bar at top position and loosen
screw 1.
Push the needle fully in (the long groove
of the left needle must face to the right
and that of the right needle to the left).
Tighten screw 1 again.