Getting Started; How To Use - Remington HC363C Instruction Manual

GETTING STARTED

Before using your hair clipper for the first time, charge for 14-16 hours.
Your clipper cannot be overcharged. However, if the product is not going to be used for an
extended period time (2-3 months), unplug it from the mains and store.
Fully recharge your hairclipper when you would like to use it again.
To preserve the life of your batteries, let them run out every six months then recharge for
14-16 hours.

HOW TO USE

Before starting the cut
To attach a comb
To remove the comb
2
080705_REM_IFU_HC363C_22L.indd 2 080705_REM_IFU_HC363C_22L.indd 2
ENGLISH
CHARGING YOUR HAIRCLIPPER
Ensure the product is switched off.
Connect the charging adaptor to the product and then to the mains.
The charging indicator will light up.
CORDED USE
Connect the charging adaptor to the product and then to the mains.
CAUTION: Extended mains only use will result in the reduction of the battery life.
Inspect the clipper making sure that it is free from hair and dirt.
Seat the person so that their head is approximately at your eye level.
Before cutting, always comb the hair so it is tangle free and dry.
Hold the comb with its teeth upward
Slide it onto and along the clipper blade until the front of the comb firmly sits against the
clipper blade.
Holding the clipper with the blades facing away from you, firmly push the comb upward
and away from the blades.
03.11.2008 19:06:40 Uhr 03.11.2008 19:06:40 Uhr