Table of Contents
Advertisement
ENGLISH
PARTS
1. Blade set
2. On/Off Switch
3. Length adjustment dial
4. Length setting window for 14 - 24 mm
comb
5. Length setting window for 3 - 13 mm
comb
6. Charging indicator light
7. Charger connector
GETTING STARTED
CHARGING YOUR APPLIANCE
•
Before using your hairclipper for the first time, charge for 14-16 hours.
•
Ensure the product is switched off.
•
Connect the charging adaptor to the product and then to the mains.
•
When charging, the charge indicator light will light up.
•
If the product is not going to be used for an extended period of time (2 – 3 months),
unplug it from the mains and store.
•
Fully recharge your hairclipper when you would like to use it again.
•
Allow 14-16 hours for a complete charge.
•
Note: To preserve the life of your batteries, let them run out every 6 months then fully
charge.
CHARGING VIA STANDARD ELECTRICAL SOCKET
•
Ensure the product is switched off.
•
Connect the charging adaptor to the product and then to the mains.
CORDED USE
•
Connect the charging adaptor to the product then to the mains.
CAUTION Extended mains only use will result in the reduction of the battery life.
CORDLESS USE
•
When the product is switched on and fully charged it can be used in cordless mode for
up to 45 minutes.
4
8. 14 - 24 mm comb
9. 3 - 13 mm comb
Not Shown:
•
Adaptor
•
Cleaning brush
•
Oil bottle
•
Comb
•
Scissors
•
Storage bag
Advertisement
Table of Contents
