Controls And Connections Of The Trekstor I.beat Swap - TrekStor i.Beat swap Operating Instructions Manual

1) Controls and connections of the TrekStor i.Beat swap

A
B
C
D
A) TFT display
B) button: Used for navigation in the sub menus. Raises the volume.
,
C) button: Starts or pauses the playback. When the button is pressed for a longer time,
A
the MP3 player is put in the standby mode or switched on.
D) button: Used for navigation in the sub menus. Lowers the volume.
;
Starts a speech recording in the "r
E) button: Is used to switch to the main menu or to a sub menu.
i
F) button: Used for navigation in the main menu. In the "M
E
this button is used to switch to the previous track or to rewind in the current track.
G) button: Used for navigation in the main menu. In the "M
F
this button is used to switch to the next track or to fast forward in the current track.
H) Loop for neck strap
I) switch: Must be in the "oN" position in order to be able to turn the device on.
w
The "off" position prevents turning on the device by accident.
J) Hi-Speed USB 2.0 port: This connection is used to transfer data to and from the
MP3 player and also for charging the MP3 player.
K) Opening for unlocking the front cover of the device.
L) Microphone
M) Earphone jack
EN 24
H
I
E
F/G
" mode.
eCord
M
K
J
" or "V
usiC
" or "V
usiC
L
" mode,
ideo
" mode,
ideo