Replacing The Journal Roll - TEC MA-1450-1 Series Owner's Manual

15. PAPER ROLL REPLACEMENT AND OTHER MAINTENANCE OPERATIONS
15.2

REPLACING THE JOURNAL ROLL

1
To remove the Receipt Cover, insert the Receipt Cover Key to the
Receipt Cover Lock, and turn it 90° clockwise.
2
Depress the [JF] key to wind up enough of the Journal Paper, then
cut the paper as shown in the figure. Depress the [JF] key to feed
the remaining paper end.
CAUTION: Never try to pull out the remaining paper end by hand.
It may cause paper jamming.
3
The wound-up portion of the paper can be easily removed from the
Reel by pulling it sideways.
4
Load new paper roll as described in Chapter 6.
15-2
15.2 REPLACING THE JOURNAL ROLL
EO1-11095