Table of Contents
Advertisement
TECHNICAL SPECIFICATIONS
ITEM
Construction
Motor
Pad speed
Electrical system
Cable
Switches
Wheels
Handle
Dimensions (L x W x H)
NOTE: Always use a pad which has been designed for electric ultra high speed burnishing of at least
2000 rpm.
The sound pressure level at the operator's ear was measured to be 70 dBA. This was a nearfield,
broad-band measurement taken in a typical industrial environment on a tile floor. This appliance
contains no possible source of impact noise. The instantaneous sound pressure level is below 63 Pa.
3-1
DIMENSION/CAPACITY
Heavy-duty die cast aluminum deck
with heavy-duty rubber bumper,
tubular steel adjustable handle with
die cast aluminum handle housing
and belt driven pad.
1.75 hp
1500 rpm
115 volts, 60 Hz
50' (23 m), 14/3, built in cord wrap
Dual levers with safety lock
Four 5" (12.7 cm) dia., 1.25" (3 cm)
wide, non-marking tread
1.5" (4 cm) tubular steel,
adjustable, easy to use thumb
activated safety lock
31.5" (80 cm) X 21.5" (54 cm) X
48.5" (123 cm)
LB1500 980101 03/08/03
Advertisement
Table of Contents
