Important Safety Instructions - Assembly; Before Assembly - Bowflex Xtreme 2 se Assembly Manual

Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.
Before using this equipment, obey the following warnings:
Read and understand all warnings on this machine.
Carefully read and understand the Assembly Manual.
• Keep bystanders and children away from the product you are assembling at all times.
• Do not assemble this machine outdoors or in a wet or moist location.
• Make sure assembly is done in an appropriate work space away from foot traffic and exposure to bystanders.
• Some components of the machine can be heavy or awkward. Use a second person when doing the assembly
steps involving these parts. Do not do steps that involve heavy lifting or awkward movements on your own.
• Set up this machine on a solid, level, horizontal surface.
• Do not try to change the design or functionality of this machine. This could compromise the safety of this
machine and will void the warranty.
• If replacement parts are necessary use only genuine replacement parts and hardware supplied by Nautilus.
Failure to use genuine replacement parts can cause a risk to users, keep the machine from operating correctly
and void the warranty.
• Do not use until the machine has been fully assembled and inspected for correct performance in accordance
with the Owner's Manual.
• Read and understand the complete Owner's Manual supplied with this machine before first use. Keep the
Owner's and Assembly Manuals for future reference.
• Do all assembly steps in the sequence given. Incorrect assembly can lead to injury or incorrect function.

Before Assembly

Select the area where you are going to set up and operate your machine. For safe operation, the location must be on a
hard, level surface.
Select a workout area that provides a minimum clearance behind the rod box of 0.5 ft (15 cm) and a total width of 6.5 ft
(2.0 m). Allow a minimum of 3.0 ft (0.9 m) free space in front of the machine.
Basic Assembly Tips
Follow these basic points when you assemble your machine:
• To make the assembly process go faster, gather the pieces you need for each step and thoroughly read the assembly
instructions for that step before starting assembly for the step.
• When tightening a locknut on a bolt, use a combination wrench to grip the locknut and make sure that it is fastened
securely.
• When attaching two pieces, gently lift and look through the bolt holes to help guide the bolt through the holes.
• As a general rule, and for all bolts and nuts on your Bowflex Xtreme
right (clockwise) to tighten and left (counterclockwise) to loosen.
Important Safety Instructions / Before Assembly
Assembly Manual
2 SE home gym, turn bolts or nuts toward the
®
3