Final Inspection - Bowflex Xtreme 2 se Assembly Manual

20. Cable & pulley routing
Attach the hooks on the ends of the Left and Right Squat Cables to the Hook installed onto the Leg Extension,
as shown in Figure 20.

21. final Inspection

Inspect your machine to ensure that all fasteners are tight and components are properly assembled. Review all
warnings affixed to machine.
Be sure to record the serial number in the field provided at the front of the Owner's Manual. Refer to the Safety
Warning Labels and Serial Number section of the Owner's Manual.
Failure to visually check and test assembly before use can cause damage to the equipment. It can also cause
serious injury to users and bystanders.
6
6
Assembly Manual
23