Troubleshooting - Omron HEM-711AC Instruction Manual

Error Indicator
If you continue to have
OMRON HEALTHCARE CUSTOMER SERVICE TOLL FREE
Please tell the representative you have an OMRON Model HEM-711AC.

TROUBLESHOOTING

Cause
Cuff under-inflated.
Movement
during measurement.
Cuff over-inflated
(more than 300 mmHg).
Battery voltage
is excessively
Problem caused by abnormal
memory function.
difficulty obtaining a reading, call
urn monitor off, wait 2-3 minutes
T
and take another measurement.
Repeat steps listed under "How
to Take a Reading." If "EE"
is displayed again, take another
measurement by pressing and
holding the START button
as shown on instruction page
12 under "How to Take
a Reading", instructions
for special conditions.
Your cuff maybe wrapped
too tightly around your arm.
Turn the monitor off, carefully
read and repeat steps listed
under "How to Take a Reading."
Replace all four "AA" batteries
low. with new batteries.
Refer to page 18, sending unit
in for repair service.
35
Correction
1-800-634-4350.