Table of Contents
Advertisement
PANEL DISPLAY
The panel display shows operational status, error messages, and function menus.
Important
Do not apply a strong shock or force of about 30 N (about 3 kgf) or more to
the panel display. Otherwise, the display might be damaged.
Note
When you select or specify an item on the panel display, it is highlighted like
.
Auto
Keys appearing as
By default, the machine is in Copy mode when you switch on. This can be
changed. See "Settings You Can Change With The User Tools" of the System
Settings.
Displays And Key Operations
Note
The following illustrations are examples for the machine with the optional
paper tray unit and large capacity tray installed.
Copy initial display
1.
The function items for the selected function are displayed.
2.
Number of originals set.
3.
Displays operational status or messages.
4.
These keys correspond to the item on the display.
Press a relevant key to select a function.
• To move the selection to the left, press the < key.
• To move the selection to the right, press the > key.
5.
Displays items which can be selected or specified.
14
cannot be used.
OK
1
4
2
3
GAMEN00
5
Advertisement
Table of Contents
