YP805010
TROUBLESHOOTING
IF THE HEADLIGHT, HIGH BEAM
INDICATOR LIGHT, TAILLIGHT,
BOX LIGHT, LICENSE PLATE LIGHT AND/
OR METER LIGHT FAIL TO COME ON.
Procedure
Check:
1. Fuse (Main, Backup)
2. Battery
3. Main switch
4. Lights switch
NOTE:
Remove the following parts before trouble-
shooting.
1) Rider seat
2) Passenger seat
3) Box
4) Legshield
5) Cowling body
Use the special tools specified in the trouble-
shooting section.
Pocket tester
90890-03112
YP******
1. Fuse
Refer to "CHECKING SWITCHES" section.
YP******
2. Battery
Check the battery condition.
Refer to "BATTERY INSPECTION" section
in CHAPTER 3.
YP******
3. Main switch
Refer to "CHECKING SWITCHES" section.
YP******
4. Lights switch
Refer to "CHECKING SWITCHES" section.
CONTINUITY
CORRECT
CONTINUITY
CONTINUITY
:
LIGHTING SYSTEM
5. Dimmer switch and pass switch
6. Seat switch
7. Wiring connection (entire lighting system)
NO CONTINUITY
Replace the fuse.
INCORRECT
Clean battery terminals.
Recharge or replace battery.
NO CONTINUITY
Replace the main switch.
NO CONTINUITY
Replace the right handlebar switch.
74
ELEC