Yamaha YP250 5GM2-AE1 2000 Service Manual page 48

COOLANT REPLACEMENT
5. Install:
: Gasket 1
: Drain bolt 2
6. Loosen:
: Screw 1 (carburetor bleed)
7. Connect:
: Hose (reservoir tank)
8. Fill:
: Radiator
(to specified level 1 )
Fill the coolant slowly, until the coolant
comes out from the carburetor drain pipe.
: Reservoir tank
(to maximum level a )
Handling notes for coolant:
Coolant is potentially harmful and should be
handled with special care.
38
INSP
ADJ
New
10 Nm (1.0 m:kg)
Recommended coolant:
High quality ethylene glycol
anti-freeze containing
corrosion inhibitors for
aluminium engine.
Coolant 2 and water 3 (soft
water):
Mixed ratio: 50%/50%
Total amount:
1.4 L
Reservoir tank capacity:
0.4 L